Call Us! 1-727-777-4206
Today!

Hubley Spirit of St. Louis Cast Iron Plane with Working Propeller for Sale *E-Museum*

Hubley Spirit of St. Louis Cast Iron Plane with Working Propeller

We get the pleasure of offering a Spirit of St. Louis plane by Hubley.  Our example is the largest size at about 13.25″ span by 11.5″ in length.  It has a deluxe feature of a clacker on the wheels for “airplane sounds” and also features a cast pilot.  Note, we never knew about these pilots until holding this one.

Condition is very good and original.  “Lindy” is emblazoned on the wing top in red.  The plane is in gray and made of cast iron.  There is one repair that can’t be seen, but is near the spring and on the bottom, but a spar.  The casting still holds together, but the split was glued back.  The rear wheel is rubber and has a flat spot.  The front two wheels are wood hubs with very soft, almost “melting”, rubber tires.

Lindy himself is shown with a hat and face of cast iron.  You can see this by looking inside the window.  Engine details are in black cast iron.

Charles Augustus Lindbergh (February 4, 1902 – August 26, 1974) was an American aviator, military officer, author, inventor, explorer, and environmental activist. At age 25 in 1927, he went from obscurity as a U.S. Air Mail pilot to instantaneous world fame by winning the Orteig Prize: making a nonstop flight from Roosevelt Field, Long Island, New York, to Paris, France. Lindbergh covered the ​33 1⁄2-hour, 3,600-statute-mile (5,800 km) flight alone in a single-engine purpose-built Ryan monoplane, the Spirit of St. Louis.

 

 

A brief history of Hubley Manufacturing Company of Lancaster, Pennsylvania:

The Hubley Manufacturing Company was first incorporated in 1894 in Lancaster, Pennsylvania by John Hubley. Their slogan was “They’re Different”. They were occasionally known as Lancaster Brand Iron Toys which manufactured electric toy train equipment and parts. In 1909, they purchased the Safety Buggy Co. factory and moved to the site. The first Hubley toys appeared in 1909 and were made of cast-iron, with themes that ranged from horse-drawn vehicles, fire engine, circus trains, different breeds of dogs, tractors, steam shovels, horses, banks, and cap guns.

The Hubley Manufacturing Company produced a wide range of cast-iron toys, doorstops, and bookends. Toys, particularly motor vehicles and cap guns, were also produced in zinc alloy and plastic. The company is probably most well known for its detailed scale metal kits of Classic cars in about 1:20 scale. Starting in 1960, Hubley participated for a couple of years with Detroit automakers as a plastic promotional model maker. Many Hubley toys are now sought-after collectibles. Hubley’s main competition in the early years was Arcade as well as a bit from A.C. Williams.

By the 1930’s autos became the headliners. By quickly converting to cheaper smaller toys during the Depression, they avoided financial woes experienced by many other toy companies. Iron shortages in WWII and commitments to fill war contracts did stop the toy division in 1942, until after the war.

As of 2019, Wikipedia tells us that, “Perhaps Hubley’s diversification in the 1960s overtaxed its profits, weakening it financially by the 1970s. Hubley was purchased by toy maker Gabriel about 1969 who continued to make its regular kits and diecast kids toys through the 1970s. A series of colorful but rather unexciting generic make diecast toy trucks were available in a variety of forms (dump truck, tow truck, etc.) up until about 1980. Gradually, the Hubley name was downplayed in favor of Gabriel.

Around 1980, Hubley was acquired by CBS Toys which later sold many dies to Ertl and Scale Models, both of Dyersville, Iowa. For example, the Hubley Ford 4000 tractor was reproduced by Scale Models, up through the 1990s and perhaps later (Scale Models 2010). In the 1990s, some Hubley vehicles like the school bus, were also reissued with minor variations from the original casting.

Ertl has now stopped production of all of the original toy dies and molds purchased from Hubley. As a result, all remaining Hubley/Ertl metal kits are fairly rare. They can be purchased from auction web sites as well as from collectors and older hobby stores.”

Additional information

Weight 4.5 lbs
Dimensions 18 × 12 × 12 in